Bulldog Gear - Box Bar 2.0 20KG 7ft Men's Bushing Olympic Barbell
Description
The Bulldog Gear - Box Bar 2.0 is a competitively priced, robust bar that does not compromise on quality.
With a tensile strength rating of 240,000, the Box Bar 2.0 is a strong addition to any serious strength and conditioning facility, home gym or small studio.
The Box Bar 2.0 weighs 20kg and is 28mm in diameter. It has chrome sleeves and a black shaft with no centre knurl, perfect for Olympic Lifting and Powerlifting.
To ensure our high manufacturing standards, we implement strict parameters that utilise micro-hardness tests and scans across all batches of barbells.
This is the 'Bang for Buck' bar.
Black hard chrome with silver sleeves, brass bushings, with 5 needle roller bearings per sleeve.
Product Overview Video:
3 Year Warranty*:
*Warranty against bending does not cover any bar which has been damaged due to negligent or faulty use, alteration, maintenance, storage or handling by the user. Negligent or faulty use includes abusive dropping of the bar (i.e., dropping the bar on a box, bench, spotter arms or pins in a power rack, excessive dropping with insufficient or damaged bumpers, or excessive dropping with iron plates, and similar usage). Any specific issues regarding a Bulldog Gear product with which a customer is not satisfied will be reviewed on a case-by-case basis. 18mm thick rubber matting must be used and the bar must not be stored with weights loaded on a rack. Indoor use only, Normal wear and tear does not fall under warranty. Warranty only valid for the original purchaser.

Weight Capacity
Shipping info
At Bulldog Gear, we stand behind the quality of our equipment. Due to the wide variety of products we offer, warranty terms can vary by category. The following outlines the terms and conditions of our product warranties.
General Warranty Exclusions
The following issues are not covered under any Bulldog Gear warranty:
-
Improper use or misuse of equipment
-
Normal wear and tear
-
Lack of proper maintenance
-
Unauthorised repairs or modifications
-
Negligence or damage from incorrect storage or assembly
Note: Using Home Gym Series or any product marked non-commercial in a commercial environment will void its warranty. If you’re unsure about product suitability, please contact our customer service team.
Warranty Claims Process
If you believe your item has a manufacturing defect or cosmetic issue:
-
Submit your claim within 30 days of receiving the item.
-
Retain all original packaging. If the packaging has been disposed of, it is your responsibility to repackage the item adequately for return.
-
Email customer.service@bulldoggear.com with:
-
Order name and number
-
Purchase date
-
Clear photos/videos of the issue
-
Description of the issue
-
For third-party products, contact the manufacturer directly. Our team is happy to help redirect you if needed.
Warranty Terms by Category
Barbells
Type | Warranty |
---|---|
15kg / 20kg Barbells | 1 Year |
Shorty / Training Bars | 1 Year |
Specialty Barbells | 1 Year |
-
Must be used on a minimum 18mm gym matting or drop pads.
-
Incorrect use or storage (e.g., outdoors, humid areas, leaving bar loaded) will void warranty.
-
Do not drop bars when unloaded or with plates <5kg.
Bumper Plates
Type | Warranty |
---|---|
5kg (all types) | 30 Days |
Home Gym Rubber Bumpers | 1 Year (Home Use Only) |
Hybrid 2 / Competition Plates | 1 Year |
Change Plates | 1 Year |
-
Dropping 5kg or 10kg plates alone repeatedly will void warranty.
-
Minimum flooring requirement: 18mm rubber or drop pads.
Kettlebells & Dumbbells
Type | Warranty |
---|---|
Hex Dumbbells / Box KBs | 1 Year |
Competition KBs | 1 Year |
-
Covers manufacturing defects only; not wear or cosmetic damage after use.
Electronics
Type | Warranty |
---|---|
Monitors | 3 Months |
Timers | 3 Months |
-
Excludes batteries, misuse, or poor environmental storage.
Selectorised & Plate Loaded Machines
-
Frame: Lifetime (against welded joint separation)
-
Weight Stack & Selector Shaft: 3 Years
-
Bearings & Pulleys: 1 Year
-
Pins, Cables, Vinyl, Upholstery, End Caps: 6 Months
Routine maintenance and proper use are required to retain warranty.
Rigs, Racks & Pull-Up Bars
Series | Warranty |
---|---|
Home Gym, Bulldog, ML | 1 Year |
Perseverance | 1 Year |
-
Cosmetic damage from regular use not covered.
Storage
-
Warranty assessed case-by-case.
-
Must report delivery damage before assembly.
-
Damage from exceeding weight limits or improper use is not covered.
Benches
Type | Warranty |
---|---|
Flat & Adjustable | 1 Year |
Zero Fold Bench | 1 Year |
-
Check weight limits; misuse voids warranty.
Textiles & Upholstery
Component | Warranty |
---|---|
Medicine Balls | 1 Year (No slamming) |
Vinyl, Zips, Velcro, Stitching, Buckles | 6 Months |
Accessories & Apparel
Product | Warranty |
---|---|
Weighted Vests (Fabric) | 30 Days |
Weighted Vests (Velcro) | 3 Months |
Weightlifting Belts | 6 Months |
Jump Ropes | 30 Days |
Shakers / Mugs / Flasks | 3 Months |
Resistance Bands | 3 Months |
Gym Rings | 6 Months |
Treadmills
Part | Warranty |
---|---|
Monitor | 3 Months |
Parts | 3 Years |
Frame | 5 Years |
-
Improper storage, use, or maintenance voids warranty.
Airbikes
Model | Warranty |
---|---|
Home Gym Airbike | 1 Year (Home Use Only) |
Airbike 4.0 | 1 Year |
-
Covers defects only. Wear on grips, pedals, and fairings not covered.
Flooring
-
Check for defects before installation.
-
Warranty excludes improper installation, unsuitable cleaning agents, or use over unfit subfloors.
-
No returns on cut flooring.
Clearance Items – Final Sale
Please note:
All clearance, sale, and “final reduction” items are sold as-is and are not covered under any Bulldog Gear warranty.
-
No returns or refunds will be accepted for these products.
-
By purchasing a clearance item, you acknowledge and accept these terms.
Discontinued Products
If a discontinued product is found to be defective due to manufacturing error, Bulldog Gear reserves the right to replace it with a comparable item. These cases will be assessed individually.
Third-Party Products (e.g., Concept2)
For any issues or warranty claims regarding third-party items (e.g., Concept2), please contact the manufacturer directly.
-
Concept2 Support: info@concept2.co.uk
-
Phone: 0115 9340140
If your product isn’t listed here or you have additional questions, contact our team:
📧 customer.service@bulldoggear.com