Bulldog Gear - PT Pod - 2 Bay
Description
Designed specifically with Personal Trainers and Small Studios in mind
Our Bulldog Gear two Bay PT Pod allows one coach to easily and safely train multiple clients simultaneously within a limited space. With two full Squat Racks available and fully integrated gym storage you can maximise floor space and have all your kit conveniently and safely stored away.
Integrated gym storage
The inbuilt storage can accommodate a huge range of kit, including: Medicine Balls, Slam Balls, Kettlebells & Bumper Plates. The configuration can be changed to suit individual facility requirements, allowing you to make best use of you floor space and tailor to you clients training needs. If you need additional storage you can customise your setup with additional modular add ons.
Modular add ons and accessories
Our PT Pods are part of our Mammoth Lite series, which makes it compatible accessories designed for our Mammoth Lite range. This opens up a huge range of optional additional extras.
Easy installation
The modular design of our PT pod range allow for easy set up and additions of additional racks/pods later down the line - making it a great solution for small studios who are planning to expand in the future.
With an interior working depth of 104cm and additional plate storage at the rear of the rack. The PT Pod is an all-in-one solution that can improve the efficiency of a PT Studio, large Home Gym, or major facility with the option of an infinite array of modular add-ons and upgrades.
Easy to set-up and install with its modular components, this rack comes as standard with a pair of Mammoth Lite J-Pegs.
Product Specifications
- Standard "Bulldog Black" powder coat with custom colour options available
- Uprights: 2.4m tall, 80 x 80 Box Section 3mm Wall
- M16 Bolts and Fasteners
- 2 x Pairs of Mammoth Lite J-Pegs with UHMW plastic inserts
Please note:
Products shown with PT Pod are sold separately.
Unit must be secured to the floor.
Floor fixings included. We advise that you seek the advice of an independent builder for the best fixing method.

Weight Capacity
Shipping info
At Bulldog Gear, we stand behind the quality of our equipment. Due to the wide variety of products we offer, warranty terms can vary by category. The following outlines the terms and conditions of our product warranties.
General Warranty Exclusions
The following issues are not covered under any Bulldog Gear warranty:
-
Improper use or misuse of equipment
-
Normal wear and tear
-
Lack of proper maintenance
-
Unauthorised repairs or modifications
-
Negligence or damage from incorrect storage or assembly
Note: Using Home Gym Series or any product marked non-commercial in a commercial environment will void its warranty. If you’re unsure about product suitability, please contact our customer service team.
Warranty Claims Process
If you believe your item has a manufacturing defect or cosmetic issue:
-
Submit your claim within 30 days of receiving the item.
-
Retain all original packaging. If the packaging has been disposed of, it is your responsibility to repackage the item adequately for return.
-
Email customer.service@bulldoggear.com with:
-
Order name and number
-
Purchase date
-
Clear photos/videos of the issue
-
Description of the issue
-
For third-party products, contact the manufacturer directly. Our team is happy to help redirect you if needed.
Warranty Terms by Category
Barbells
Type | Warranty |
---|---|
15kg / 20kg Barbells | 1 Year |
Shorty / Training Bars | 1 Year |
Specialty Barbells | 1 Year |
-
Must be used on a minimum 18mm gym matting or drop pads.
-
Incorrect use or storage (e.g., outdoors, humid areas, leaving bar loaded) will void warranty.
-
Do not drop bars when unloaded or with plates <5kg.
Bumper Plates
Type | Warranty |
---|---|
5kg (all types) | 30 Days |
Home Gym Rubber Bumpers | 1 Year (Home Use Only) |
Hybrid 2 / Competition Plates | 1 Year |
Change Plates | 1 Year |
-
Dropping 5kg or 10kg plates alone repeatedly will void warranty.
-
Minimum flooring requirement: 18mm rubber or drop pads.
Kettlebells & Dumbbells
Type | Warranty |
---|---|
Hex Dumbbells / Box KBs | 1 Year |
Competition KBs | 1 Year |
-
Covers manufacturing defects only; not wear or cosmetic damage after use.
Electronics
Type | Warranty |
---|---|
Monitors | 3 Months |
Timers | 3 Months |
-
Excludes batteries, misuse, or poor environmental storage.
Selectorised & Plate Loaded Machines
-
Frame: Lifetime (against welded joint separation)
-
Weight Stack & Selector Shaft: 3 Years
-
Bearings & Pulleys: 1 Year
-
Pins, Cables, Vinyl, Upholstery, End Caps: 6 Months
Routine maintenance and proper use are required to retain warranty.
Rigs, Racks & Pull-Up Bars
Series | Warranty |
---|---|
Home Gym, Bulldog, ML | 1 Year |
Perseverance | 1 Year |
-
Cosmetic damage from regular use not covered.
Storage
-
Warranty assessed case-by-case.
-
Must report delivery damage before assembly.
-
Damage from exceeding weight limits or improper use is not covered.
Benches
Type | Warranty |
---|---|
Flat & Adjustable | 1 Year |
Zero Fold Bench | 1 Year |
-
Check weight limits; misuse voids warranty.
Textiles & Upholstery
Component | Warranty |
---|---|
Medicine Balls | 1 Year (No slamming) |
Vinyl, Zips, Velcro, Stitching, Buckles | 6 Months |
Accessories & Apparel
Product | Warranty |
---|---|
Weighted Vests (Fabric) | 30 Days |
Weighted Vests (Velcro) | 3 Months |
Weightlifting Belts | 6 Months |
Jump Ropes | 30 Days |
Shakers / Mugs / Flasks | 3 Months |
Resistance Bands | 3 Months |
Gym Rings | 6 Months |
Treadmills
Part | Warranty |
---|---|
Monitor | 3 Months |
Parts | 3 Years |
Frame | 5 Years |
-
Improper storage, use, or maintenance voids warranty.
Airbikes
Model | Warranty |
---|---|
Home Gym Airbike | 1 Year (Home Use Only) |
Airbike 4.0 | 1 Year |
-
Covers defects only. Wear on grips, pedals, and fairings not covered.
Flooring
-
Check for defects before installation.
-
Warranty excludes improper installation, unsuitable cleaning agents, or use over unfit subfloors.
-
No returns on cut flooring.
Clearance Items – Final Sale
Please note:
All clearance, sale, and “final reduction” items are sold as-is and are not covered under any Bulldog Gear warranty.
-
No returns or refunds will be accepted for these products.
-
By purchasing a clearance item, you acknowledge and accept these terms.
Discontinued Products
If a discontinued product is found to be defective due to manufacturing error, Bulldog Gear reserves the right to replace it with a comparable item. These cases will be assessed individually.
Third-Party Products (e.g., Concept2)
For any issues or warranty claims regarding third-party items (e.g., Concept2), please contact the manufacturer directly.
-
Concept2 Support: info@concept2.co.uk
-
Phone: 0115 9340140
If your product isn’t listed here or you have additional questions, contact our team:
📧 customer.service@bulldoggear.com