Bulldog Gear - MLHR - 2.16m Half Rack With Pull Up Bar
Description
The Bulldog Gear MLHR Half Rack is a durable and cost-effective training solution designed to enable versatility in any strength and conditioning programme.
Designed, engineered and manufactured from 80mm x 80mm box section 3mm thick. The MLHR2 is a robust half rack suitable for squatting, pressing and benching.
The rack includes a single pull-up bar for pull-ups, bar dips and bar muscle-ups with the option of attaching gymnastic rings for ring dips and press ups.
Bringing together the best of British design to deliver the most modular and adaptable half rack available.
Featuring laser cut numbers 1-25 for easy barbell placement
The all-rounder of our product range, this half rack is suitable for both commercial use and domestic - home/garage setups alike.
- Each upright is 2.16 Metres High (Including the base)
- Rack floor print is 1.2 Metres x 1.2 Metres
- 3mm thick steel uprights with 50mm hole spacings allowing for quick, easy and accurate placement of J Pegs
- J-Pegs UHMW plastic lined outside for optimal bar positioning and protection
- Pull-Up Bar 33.7 mm in diameter
- Pull Up Bar Height is 2.1m
- Max Load on the rack is 450kg
- Max Load on the Pull up bar is 300kg
- J-Pegs UHMW plastic lined outside for optimal bar positioning and protection
- 6mm thick Triangle Plates and 6mm Cross Member Plates
- 8mm thick patented J-Pegs
- optional anchor sets included so additional stability if kipping or performing levers
- 6 x Rear bumper plate storage included
- M16 Bolts and Fasteners
Please Note:
All optional extras are sold separately.
Compatible add ons include:
Couldn't load pickup availability

Weight Capacity
Shipping info
At Bulldog Gear, we stand behind the quality of our equipment. Due to the wide variety of products we offer, warranty terms can vary by category. The following outlines the terms and conditions of our product warranties.
General Warranty Exclusions
The following issues are not covered under any Bulldog Gear warranty:
-
Improper use or misuse of equipment
-
Normal wear and tear
-
Lack of proper maintenance
-
Unauthorised repairs or modifications
-
Negligence or damage from incorrect storage or assembly
Note: Using Home Gym Series or any product marked non-commercial in a commercial environment will void its warranty. If you’re unsure about product suitability, please contact our customer service team.
Warranty Claims Process
If you believe your item has a manufacturing defect or cosmetic issue:
-
Submit your claim within 30 days of receiving the item.
-
Retain all original packaging. If the packaging has been disposed of, it is your responsibility to repackage the item adequately for return.
-
Email customer.service@bulldoggear.com with:
-
Order name and number
-
Purchase date
-
Clear photos/videos of the issue
-
Description of the issue
-
For third-party products, contact the manufacturer directly. Our team is happy to help redirect you if needed.
Warranty Terms by Category
Barbells
Type | Warranty |
---|---|
15kg / 20kg Barbells | 1 Year |
Shorty / Training Bars | 1 Year |
Specialty Barbells | 1 Year |
-
Must be used on a minimum 18mm gym matting or drop pads.
-
Incorrect use or storage (e.g., outdoors, humid areas, leaving bar loaded) will void warranty.
-
Do not drop bars when unloaded or with plates <5kg.
Bumper Plates
Type | Warranty |
---|---|
5kg (all types) | 30 Days |
Home Gym Rubber Bumpers | 1 Year (Home Use Only) |
Hybrid 2 / Competition Plates | 1 Year |
Change Plates | 1 Year |
-
Dropping 5kg or 10kg plates alone repeatedly will void warranty.
-
Minimum flooring requirement: 18mm rubber or drop pads.
Kettlebells & Dumbbells
Type | Warranty |
---|---|
Hex Dumbbells / Box KBs | 1 Year |
Competition KBs | 1 Year |
-
Covers manufacturing defects only; not wear or cosmetic damage after use.
Electronics
Type | Warranty |
---|---|
Monitors | 3 Months |
Timers | 3 Months |
-
Excludes batteries, misuse, or poor environmental storage.
Selectorised & Plate Loaded Machines
-
Frame: Lifetime (against welded joint separation)
-
Weight Stack & Selector Shaft: 3 Years
-
Bearings & Pulleys: 1 Year
-
Pins, Cables, Vinyl, Upholstery, End Caps: 6 Months
Routine maintenance and proper use are required to retain warranty.
Rigs, Racks & Pull-Up Bars
Series | Warranty |
---|---|
Home Gym, Bulldog, ML | 1 Year |
Perseverance | 1 Year |
-
Cosmetic damage from regular use not covered.
Storage
-
Warranty assessed case-by-case.
-
Must report delivery damage before assembly.
-
Damage from exceeding weight limits or improper use is not covered.
Benches
Type | Warranty |
---|---|
Flat & Adjustable | 1 Year |
Zero Fold Bench | 1 Year |
-
Check weight limits; misuse voids warranty.
Textiles & Upholstery
Component | Warranty |
---|---|
Medicine Balls | 1 Year (No slamming) |
Vinyl, Zips, Velcro, Stitching, Buckles | 6 Months |
Accessories & Apparel
Product | Warranty |
---|---|
Weighted Vests (Fabric) | 30 Days |
Weighted Vests (Velcro) | 3 Months |
Weightlifting Belts | 6 Months |
Jump Ropes | 30 Days |
Shakers / Mugs / Flasks | 3 Months |
Resistance Bands | 3 Months |
Gym Rings | 6 Months |
Treadmills
Part | Warranty |
---|---|
Monitor | 3 Months |
Parts | 3 Years |
Frame | 5 Years |
-
Improper storage, use, or maintenance voids warranty.
Airbikes
Model | Warranty |
---|---|
Home Gym Airbike | 1 Year (Home Use Only) |
Airbike 4.0 | 1 Year |
-
Covers defects only. Wear on grips, pedals, and fairings not covered.
Flooring
-
Check for defects before installation.
-
Warranty excludes improper installation, unsuitable cleaning agents, or use over unfit subfloors.
-
No returns on cut flooring.
Clearance Items – Final Sale
Please note:
All clearance, sale, and “final reduction” items are sold as-is and are not covered under any Bulldog Gear warranty.
-
No returns or refunds will be accepted for these products.
-
By purchasing a clearance item, you acknowledge and accept these terms.
Discontinued Products
If a discontinued product is found to be defective due to manufacturing error, Bulldog Gear reserves the right to replace it with a comparable item. These cases will be assessed individually.
Third-Party Products (e.g., Concept2)
For any issues or warranty claims regarding third-party items (e.g., Concept2), please contact the manufacturer directly.
-
Concept2 Support: info@concept2.co.uk
-
Phone: 0115 9340140
If your product isn’t listed here or you have additional questions, contact our team:
📧 customer.service@bulldoggear.com